CAM LUBE QUESTION

1958 delivery

Well Known Member
Supporting Member 2
#1
I've always used the moly grease for flat tappet break in on not only the lobes but also on the bearing journals. Is this ok or should I be using something else on the bearing journals?
 

1958 delivery

Well Known Member
Supporting Member 2
#6
What would you say is a good sealer to use on the intake manifold bolts? The mani I took off had puddles sitting on the intake coming from the bolts SBC
 

1958 delivery

Well Known Member
Supporting Member 2
#18
Another question
The 3 cam bolts that hold the cam gear. Should lock washers be used ?, The bolts that came off were flange head with no lock washers, if no lock washers should I use a medium thread locker such as Loctite blue?
 
Top