Close One

63 dream'n

Well Seasoned Member
Supporting Member 4
That what I think too. I was very skeptical about the 40 spline axles fixing the issue. I was wrong!

Just thinking out loud is there a chance that the 35 spline axles still allowed the housing to deflect and the 40 spline axles just make it that much more rigid
There was a very dramatic difference between the two axles
 

Ishiftem

Well Known Member
Supporting Member 2
You are right on the difference. In person they look like the came out of a Mack. There is some play in the splines. Enough where I think that if the housing was moving, it would still show up in the tire wear pattern.
 

El Rat

Well Known Member
Hi
You could shorten the housing so that both axles were the same length then reverse the axles every other pass that way...well you get it!
 
Top