Concrete Guy Help

Iowa 409 Guy

Well Seasoned Member
Supporting Member 15
How do I get these fasteners out? Pry out center first with a crowbar, then screw nut back on and pry out outside? I don't have a crowbar here or I would try it.

TIA
DaveIMG_20180421_172054788.jpg
 

Iowa 409 Guy

Well Seasoned Member
Supporting Member 15
Searched the net. When they put those in the hole is supposed to be drilled deep enough so you can hammer the whole fastener back in the wall when done with them. That wasn't done. So I'll try the crowbar.
 
Top