Console lamp assembly

Red 409 63 impala

Well Known Member
Purchased a new console base ( old one looked bad ). Also the previous owner jury rigged a lamp assembly that looked terrible. The problem is the lamp assembly does not snap in the console opening. I do not have an original to compare the new one with. Has anyone run into this situation? The lamp assembly is a OER part.
 

Attachments

  • 4F97D787-8457-48D9-B64D-D35914047F13.jpeg
    4F97D787-8457-48D9-B64D-D35914047F13.jpeg
    44.7 KB · Views: 18
  • 246031DB-9C8A-4843-AA6B-85189C388088.jpeg
    246031DB-9C8A-4843-AA6B-85189C388088.jpeg
    56.5 KB · Views: 19

Red 409 63 impala

Well Known Member
PROBLEM SOLVED...I noticed there were tabs under each clip meant to hold the metal frame in place. When they assembled the lamp housing they were positioned I managed toforce them past the rim and bend them up it now worked. Another repo part not assembled
 
Last edited:
Top