control arms
- Thread starter Dond409
- Start date
Very trick Don! Can you tell the difference between them and the stock arms on the launch? Did you have wheel hop before?
Those trailing arms look great. They resemble old school ladder bars but without the bind! Are those Metco? I had Metcos on a 10 second street car and was very impressed with them. 1.51 60 ft. on 275-60-15 bfg drag radials.
Rear arms
Don,
Where did you find those arms?
Steven
Don,
Where did you find those arms?
Steven
Rear Arms
A friend of mine owns a machine shop, back in my home town of Newark, NY. Here's his website www.truetechperformance.com . All I gave him was one each of the upper and lower arm. He also made an ajustable panhard too. Did you check out those spring seats? All pieces were made on cnc milling center
A friend of mine owns a machine shop, back in my home town of Newark, NY. Here's his website www.truetechperformance.com . All I gave him was one each of the upper and lower arm. He also made an ajustable panhard too. Did you check out those spring seats? All pieces were made on cnc milling center
CDNpontiac409guy
Banned
ooooo....... I can think of a car that these would be just right for 
Those are NICE! 