Distributor Wiring ????

[Nuts]

Okay all,

I'm finishing up the 409 installation for the 2-4 times.. Can't remember the distributor wiring. There are three wires coming out of the stock resistor harness (no ballist resistor). One is wrapped white/red tied to a green wire. The third is blue. I have the white/red/green going to the (+) side of the coil. Where does the blue one go ??? (-) ???

Dang-it it's rough getting old - Lucky I can still remember my name !!!!!!

 

[Nuts]

Thanks for reminding me !!!!

Gearhead,

Thanks for reminding me. I should have remembered that because I installed an oil pressure gauge in place of the clock.... Thanks a lot...