Trying to figure this out. An BBC engine I got recently was told is was rebuilt about 3k ago and I have been tinkering with it for the last few months.
Here's the issue
On start up it smokes slightly
on ilde it's clean
normal acceleration it's clean
on rev up it smokes - BAD
no fouled plugs on any cylinders - all tan
I changed the PVC valve all vacuum hoses oil three four times. I am thinking the rings are gone as well as the valve seals.
Ideas?
Here's the issue
On start up it smokes slightly
on ilde it's clean
normal acceleration it's clean
on rev up it smokes - BAD
no fouled plugs on any cylinders - all tan
I changed the PVC valve all vacuum hoses oil three four times. I am thinking the rings are gone as well as the valve seals.
Ideas?