Firewall factory marks

Jayz63

Well Known Member
How’s does everyone here feel about putting the factory markings back on the car after a full restore. I took pics and measurements of the markings before I painted but not sure if I should re mark them. Here is what they looked like before.
 

Attachments

  • CA41DDEA-023C-4141-839B-90ADD6E0C8BA.jpeg
    CA41DDEA-023C-4141-839B-90ADD6E0C8BA.jpeg
    63.7 KB · Views: 97
  • 2C13E5A7-ADB9-409D-A9B8-78137CDB9AF7.jpeg
    2C13E5A7-ADB9-409D-A9B8-78137CDB9AF7.jpeg
    69.7 KB · Views: 96
  • 1B74D594-5095-446A-9AA3-06C0CA733B9B.jpeg
    1B74D594-5095-446A-9AA3-06C0CA733B9B.jpeg
    69.6 KB · Views: 91

409gang

Well Known Member
Supporting Member 1
How’s does everyone here feel about putting the factory markings back on the car after a full restore. I took pics and measurements of the markings before I painted but not sure if I should re mark them. Here is what they looked like before.
Keep good photos for history, you can always add them later if you want.
 

4onthefloor

Well Known Member
Supporting Member 1
Looks like paint code, possible P and B for paint and body inspection. I cant see a T for trim.
 

R63ss

Well Known Member
Supporting Member 4
It all depends on what the end goal is.If you are going for a 100 point,bring it back to original condition restoration,then it should go back on.It is part of the history of that car.The markings on my convertible will go back on,as well as the different colored paint splotches on the suspension,springs,and pinion.
Ultimately it is your car and whatever you want to do with them is your preference.
 

quik9r

Well Known Member
Supporting Member 3
did you find the water decal that says "water test" with a circle around it. I think driver sidefirewall....gotta check me notes
 
Top