First gen x frame progress.

Nifty9

Member
Ready to take the chemically dipped, blasted and powder coated chassis over to set my 59 El Camino body on it. Tubular upper and lower A arms, 2 inch drop spindles with coil overs. Power steering and disc brakes on all four corners with tubular trailing arms and adjustable pan hard bar.
The 348 tri power and 4l60e will be mated and resting between the rails. More to come.
 

Attachments

  • 3B7B9E25-EBA4-435C-B7A7-835952E7BBBF.jpeg
    3B7B9E25-EBA4-435C-B7A7-835952E7BBBF.jpeg
    86.7 KB · Views: 64
  • CE84E99C-80E0-4A4A-843F-4B557DD44273.jpeg
    CE84E99C-80E0-4A4A-843F-4B557DD44273.jpeg
    80.6 KB · Views: 63
  • 3E8AAF54-CAE1-4E3C-8A75-5313A62D3759.jpeg
    3E8AAF54-CAE1-4E3C-8A75-5313A62D3759.jpeg
    80.2 KB · Views: 61

La Hot Rods

Well Seasoned Member
Supporting Member 15
I notice you didn't add the the left upper control arm on the rear. Not sure how hard you plan on beating on this car/truck but it is something you may want to consider.
 

ragtp66

Well Known Member
Are you using the Borgeson box? Curious to find someone that has one I am considering it for my Brookwood build.
 
Top