Are they supposed to have star washers? Talking 409.
Flywheel Cap Screws
- Thread starter Iowa 409 Guy
- Start date
Thanks
I use star and lock tight. It might be over kill but that’s ok with me.
Grudge race # 2.
I always put them back on but if they're not new just like a lock washers probably not as effective as new. I use locktight also.
Do the ARP bolts come with them? 
Did you get a lift ????
Did you get a lift ????
Went over to Joe the Plumbers and used his. I learned that all lifts won't work on an X frame. 10,000# lift and we had to put a piece of square tubing across to make it work. Then that was in the way of pulling the trans. Damn sure will know the lift I buy will work for me.
My two post works on them, but it is a paint to set.
Asymmetrical works great. You have the info Dave. 
My ARP bolts did not come with the washers. I followed their directions and used the moly lube and torqued to their specs.Do the ARP bolts come with them?
That's what I was thinking, surly your not using old factory bolts.
70 f/p?
I can’t remember if it was 70 or 74? I would have to look when I get home after work today.