Front end rebuild?

chase

Member
Starting to replace ball joints, tie rod ends, coil springs, shocks, wheel bearings, sway bar and bump stops on my front suspension. I have been looking at Moog wherever possible (not set on this), not sure about everything else. Thought about 1" lowering coils (don't want to go much lower with springs). Keeping the stock control arms and spindles. Would like to beef up the sway bar if it would stiffen up the ride a little bit. Any dos and do not's? Rubber, Poly or something I don't know about? Really would appreciate any advice given. Thanks.
 
Top