Going on the Dyno

Ishiftem

Well Known Member
Supporting Member 2
Tuesday my engine will be going on the dyno. Any guesses on what kind of power it will make? The winner gets a hearty handshake and a pat on the back.

477"
GM 690 heads with bigger valves and a home port job.
Edelbrock intake with a little clean up and 5/8" spacers
Edelbrock 750 carbs.
14.5:1 compression.
1/16 Rings standard oil tension.
Solid roller cam 254/260 duration at .050 and 660 lift.
2" headers with merge collectors

If you want other details, just ask!
 

63 dream'n

Well Seasoned Member
Supporting Member 4
Tuesday my engine will be going on the dyno. Any guesses on what kind of power it will make? The winner gets a hearty handshake and a pat on the back.

477"
GM 690 heads with bigger valves and a home port job.
Edelbrock intake with a little clean up and 5/8" spacers
Edelbrock 750 carbs.
14.5:1 compression.
1/16 Rings standard oil tension.
Solid roller cam 254/260 duration at .050 and 660 lift.
2" headers with merge collectors

If you want other details, just ask!

What’s the rotating assembly Dan.............???
 
Top