Half A$$ed Project

DonSSDD

Well Known Member
Supporting Member 2
Cecil, you are a metal artist and I mean that as a compliment. Beautiful truck.
 

oldskydog

Well Known Member
Supporting Member 10
Cecil said he is not doing the metal work,but he is a good pilot,and he stayed at the Holiday Inn.:brow
Correctamundo. My body guy is a PIA perfectionist and his talents are being wasted on this old truck. I never intended it to be show quality but he refuses to do anything less than his own standards. Of course my standards are way lower…..more like my available funds.
 

oldskydog

Well Known Member
Supporting Member 10
Don, I can't post pics on the PM board so here's the card for the cam in my 63 engine. I built this about 10 years ago and never fired. Way more than I need in this build.

my 63 409 cam.jpg
 

Don Jacks

Well Seasoned Member
Supporting Member 3
If the springs are set up for this cam,then you'll be fine with that little Comp unit.Yes,that's a bit much for this build.
 
Top