Inner rocker fitment on 63-64 Impalas

Deadwolf

Well Known Member
So I just got my inner rockers made by Dynacorn. These things fit like garbage. I was almost understanding the bad fit on the passenger side due to all the other work I've done, but on the drivers side I have the original outer rocker and everything and it seems like the panel is about a 1/2" to an 1" too wide. I'm thinking the bends may not be right. But also it doesn't follow the upper edge very well and is going to require some minor bending to get it into the right place. The passenger side is going to require so much bending that I will probably have to make a relief cut in it to get it to fit up, but at least the width is better.

Anyone else have these issues with the replacement inner rockers and how did you go about making them fit?
 
Top