Long Shifter

409gang

Well Known Member
Supporting Member 1
Can anyone who is running a V-gate Long Shifter share a picture as to how they covered it with a boot.
I started to build a bump up for a boot but was wondering what everyone else was doing.
Thanks Steve....
 
Last edited:

409gang

Well Known Member
Supporting Member 1
This is what I came up with, I fabricated a sheet metal tunnel cover that I still need to make some kind of boot around the 2 shifter handles. I know other people are running these shifters and was wondering what they were doing to close up the gaping hole in the floor, if left open you would have a cockpit full of smoke and I don't think it would pass tech.tempImagey82XM1.jpgtempImageUgFAVa.jpgtempImage6ekq1Y.jpg
 
Top