Does anyone happen to have the weight of a stock x-frame front lower control arm including shaft and ball joint? I am hoping someone has one sitting around and can make this an easy question!
I have a buddy with some laying around but I asked him and he has no way of weighing them. To be clear. His are off of a 1964 chevy Impala. Keep in mind there are different types which will change the weight. The ones he is replacing his old beat up pieces with are 63 I think with no sway bar links welded on. Came off of a car with an air cooled powerglide.
Thank you very much Jim!
And for Jeff - the answer is I have a set of aftermarket tubular ones that seem very heavy. The last thing I am going to do is add weight to my car! If they are a lot heavier I probably won't use them.
Got the tubulars that Showcars sell last week which are very nice looking and seem to be good quality. I installed just the uppers which weighed the same as the originals 9lbs. for the reason 58 delivery states above, more caster. So! I will have a set of real purty tubular lowers for sell for cheap soon.