My personal nightmare

R63ss

Well Known Member
Supporting Member 4
Working on some boxes to go where the duel 6 volt batteries use to be, one needs to be shorter to clear the fuel pump.
Need to make bottoms next.
The funny shape is to fallow the shape of the battery brackets that are part of the floor pan.
View attachment 67275
View attachment 67276
I used my bench with a piece of pipe for the radius bends. :smoke
Nice skills
aut viam inveniam aut faciam(How’s your Latin)
 

La Hot Rods

Well Seasoned Member
Supporting Member 15
Chipping away at these boxes.
The one on the right side will have a two main fuses and fuel pump relay. The left one will be for use as a glove box or super secret stash box. :D
20190118_100008 (2).jpg
20190118_100101 (2).jpg
20190118_100142 (2).jpg
I would have liked to have the nut zurts in the body and not the box, but I couldn't get the tool in there.
If I find that the nut zurts bother me to much, I will just use nuts and bolts.
These boxes will be lined with carpet and have a drain plug in the bottom.
This is one of the last fab jobs on this project short of wiring the dash. :good
 

plumcrazy

Well Known Member
Supporting Member 6

HA! I just look for the wisp of smoke..... HA, kidding, we just lived that!!!

Wow, thats a lot of work man, looks like you made that harness from scratch! Can you take a pic of the connection ends, any male female connection. Like to see what people use. On the healey we used the bullet style, here are the normal gm...
 
Top