lennyjay
Well Known Member
I need to check my pushrod length for ordering a new set, both int and exh. pushrods. What is a good pushrod checker (brand) you have used to do this. Heads are 690's, solid Comp cam, Howard lifters, Crane 1.70 rockers and running 3/8 pushrods. I would like to check length with springs on, and guide plates on (motor is out, new build). Also the size of the checker, I see many 5/16 but not many made in 3/8 diameter, what diameter and adjustable length is best?
Would like to get it made in steel.....
Thanks for your help....
Would like to get it made in steel.....
Thanks for your help....