Lynn Davis
Member
Hello Folks, as a suggestion from Ian I would like your advice on a cam for my 348. I have the block machined .30 over and have 10.5 to 1 pistons, since I found this site I have also found that I may have started a high dollar boat anchor (LOL) it looks as if my 348 is a 1958 truck block and I have to look at the heads again but my best guess is the "58" with no water around the plugs
Well the good part is it's going to be a driver I dont do TQ's because I like to enjoy the ride. Any help or suggestions would be great.
Thanks again for letting me be part of this site.
Lynn
1960 Bel-Air
1939 Chevy
Well the good part is it's going to be a driver I dont do TQ's because I like to enjoy the ride. Any help or suggestions would be great.
Thanks again for letting me be part of this site.
Lynn
1960 Bel-Air
1939 Chevy