Kdurgin
Well Known Member
Here are some updated photos of my ongoing 62 project. I'm planning on taking it for paint around 12/1 now.
Here is what I ended up with for a lower steering column to run the new Borgeson 600 based box:
I ran 2 IDITIT polished
stainless u-joints because I wanted the pinch bolts and not the set screw type.
Floors all in and POR-15'd
Trunk and inner wheel well work finally done too.
Used to look like this:
Misc pix:
Here is what I ended up with for a lower steering column to run the new Borgeson 600 based box:
I ran 2 IDITIT polished
stainless u-joints because I wanted the pinch bolts and not the set screw type.
Floors all in and POR-15'd
Trunk and inner wheel well work finally done too.
Used to look like this:
Misc pix: