Rear window trim for 60 Coupe

[Rob from Australia]

Hi Does anyone know where I can get the chrome/stainless trim for the rear window of my 60 coupe. I only need the top piece but will buy the whole set if I have to. New or 2nd hand.
So hard to get parts in Australia!

Thanks Rob

 

[1958 delivery]

No such thing as an SS in 1960 if that's what your title is implying.

 

[Rob from Australia]

Hi yes my mistake I think the right name is Sport Coupe not SS, thanks

 

[oldskydog]

You might try Dave Kosman, he specializes in and restores the trim pieces. He advertises in Hemmings and also sells on ebay.

 

[tripower]

As Cecil says Dave would be your best bet. Here is a link to his website. http://www.trimrestoration.com/

 

[64ss409]

And he has a bunch of 60 Chevy parts on hand. http://www.trimrestoration.com/

He did the finish work on my neighbor's 60.

Edit--tripower types faster than I do

 

[tripower]

And he has a bunch of 60 Chevy parts on hand. http://www.trimrestoration.com/

He did the finish work on my neighbor's 60.

Edit--tripower types faster than I do

And on my Bel Air...

 

[Geary Trussell]

There are no reproduction parts to my knowledge. You will have to go the swap meet , Hemmings, on line sources such as ebay or Chevytalk to obtain these parts. They are not readily available even in the USA and can imagine even more difficult to find down under. Good luck don't give up.

 

[DonSSDD]

As said above, try Dave Kosman first. If he doesn't have the part, check with JENS who posts over on ChevyTalk on the 58-60 forum. He has a lot of 58, 59, and 60 stuff and is a great guy to deal with, as is Dave Kosman.

Don

 

[64ss409]

Dave has about 40 1960 Chevy parts cars in his lot. 60's are his specialty.

 

[ragtp66]

Can also try Brent Reese on facebook or call him at 714-720-3438 He is in Covina, Ca and is always parting cars also Ryan Gomez also on facebook or email him at molina0639@att.net He parts out mostly Impalas also.