As above trim the dripers.
R63ss Well Known Member Supporting Member 4 Nov 10, 2018 #22 I used a spot weld bit to drill out the welds.I stopped just before I went through the dripper to insure I wouldn’t get into the valve cover.I was able to manually bend the dripper until it snapped what was left of the weld.
I used a spot weld bit to drill out the welds.I stopped just before I went through the dripper to insure I wouldn’t get into the valve cover.I was able to manually bend the dripper until it snapped what was left of the weld.
GCAMINO Supporting Member 1 Nov 10, 2018 #23 I used the SC repo fake dripper covers on my 63. I thought they looked fine.