Upper molding clips 1963 Impala SS

Red 409 63 impala

Well Known Member
Well I have the windshield out and wonder about the upper molding clips. After cleaning up all the sealer I discovered a total of five clips the clips on each end have small philips screws holding them in. The other three clip to the frame of the windshield. Does that seem correct? I looked at a few vendors and they specify different amounts in there kits.
 

pvs409

Well Known Member
Supporting Member 11
The link below is what I have used on about 5 restorations on 62's that have the same upper windshield stainless on all 62-64 Impala 2 door hardtops
No screws used -used about 9 of these evenly spaced with 3 strip caulk sealer after the windshield is installed.

None of the 5 cars had screws but they had at least 7 or 8 reveal molding clips like these

https://www.classicchevy.com/full-size-chevy-windshield-molding-clip-set-1961-1964-40-141516-1.html

the back glass reveal molding clips are different set and have more clips
 
Top