WELL..............

Phil Reed

Well Seasoned Member
Supporting Member 10
I found one. Got my 1/2" break over bar and those lug nuts feel like they were welded on!!!! Could budge a one!!!
Gonna try again today!!
 

R63ss

Well Known Member
Supporting Member 4
People love to put lug nuts on with an impact gun with way to much torque.You might need a length of pipe.Just watch the paint.You will get it,Good luck
 

Phil Reed

Well Seasoned Member
Supporting Member 10
20200720_114259.jpg20200720_114310.jpg20200720_114319.jpg
Here it is Mike!!!! Measured rotor and it is 12". Measured for backspacing and appears it needs 5 1/2". Been crushing Coker Tires and they state they do not make a rim that will clear disc brakes. They recommend their 55-57 Chevy rim for that. But will the original Corvette wheel cover work with that??
Carnack the Magnificent......please help a poor, little farm boy from Kansas.......PLEASE!!!!!!
 
Top