What yoke for a ST10?

[DonSSDD]

Since my Centerforce needs replacing due to being out of balance, I decided it was a good time to get a ST10, what yoke would I need for the ST10? I have a stock driveshaft, so I assume that is a 1310 u joint size, is this the one that fits?

• Click to Enlarge Image
• • 
  • 
  • View All Images

Yoke, Steel, 1310, GM, TH400/Muncie,M-22/M-21/B.W. Super T10/Richmond T10/Doug Nash/Jerico, 32-Spline, Each

 

[Rickys61]

Since my Centerforce needs replacing due to being out of balance, I decided it was a good time to get a ST10, what yoke would I need for the ST10? I have a stock driveshaft, so I assume that is a 1310 u joint size, is this the one that fits?

• Click to Enlarge Image
• • 
  • 
  • View All Images

Yoke, Steel, 1310, GM, TH400/Muncie,M-22/M-21/B.W. Super T10/Richmond T10/Doug Nash/Jerico, 32-Spline, Each

Don...
If it's a Super out of a mid 70's Corvette, Camaro or Firebird, it should be the 32 spline, same as a Turbo 400... There was another style in '82 and '83 I think that has a odd tail shaft with mounts for a torque arm that has a smaller output, like a Turbo 350 or fine spline Powerglide.. Hope this helps..
Rick

 

[BSL409]

Go with the longer one

 

[DonSSDD]

Thanks Ricky, its a 32 spline out of a late 70's Camaro.

Brian, the shaft on there now is about 6 inch overall, would I not go with a similar length?