Where was U-tube in the 60's?
D Don Jacks Well Seasoned Member Supporting Member 3 Dec 8, 2020 #2 Heck I aligned the rods and spot welded them in place,didn't hold
Iowa 409 Guy Well Seasoned Member Supporting Member 15 Dec 8, 2020 #3 Probably different compositions in the metal Don.
bobs409 Administrator Dec 8, 2020 #4 Probably hardened steel. If you ever tried to weld that, it looks great but you can usually just rip it apart! I have some angle iron that was an old bed frame and you can't weld this stuff!!
Probably hardened steel. If you ever tried to weld that, it looks great but you can usually just rip it apart! I have some angle iron that was an old bed frame and you can't weld this stuff!!
La Hot Rods Well Seasoned Member Supporting Member 15 Dec 8, 2020 #5 You can't cut that bed frame with a band saw either.
Iowa 409 Guy Well Seasoned Member Supporting Member 15 Dec 8, 2020 #6 Bed frame......probably work hardened.....