Will the MDS distributor work with tri-power(three 2's)

R

Russ348

Well Known Member
O.K. seems most of you perfered the MSD unit. Just wanted to be sure
this would work with the 3-2barrel tri-power. :)
 
B

biscaynewagon

Well Known Member
Supporting Member 2
Russ,

I'm not 100% sure on this, but from what I've heard, MSD unit is taller than stock dist. , hance if you're going to spend the extra "$$$" :bow for tripower air cleaner it probably will not fit.
Double check on this first before you get the MSD unit. Personally I think have IgnitionMan redo your distributor probably is the better solution, it will look stock :deal for sure. I don't know just my opinoin :)

Please somebody correct me if I'm wrong.
 
I

IgnitionMan

Banned
You aren't wrong.

I do two distinctly different conversions,

HEI with remote module for stock cast iron W dists, MSD trigger for same, uses a stock W dist, so, not higher than stock

Next, small/big block aluminum dist with attached adapters for fit to W engines, HEI with module mounted on dist body, or MSD trigger only. This dist is about 1-1/8th inches higher overall than a W dist is.

Can do same for Mallory, real, live HEI or MSD trigger only.

Not an ad, they aren't allowed on this part of the site, just FYI.
 
You must log in or register to reply here.
Top