Wilson Header Mfg.

Barry Taylor

Well Known Member
Supporting Member 3
We can sure do that Brian!! Will be fun! I've had a 27T left hand steer roadster back in the 80s but never a center steer car. Your car has been a lot of inspiration for me in my decision to buy this car. I had the front motor plate from the dragster that Ronnie and I raced for a couple of years, and Good Ole Mr. Wilson put the last piece of the puzzle together for me. See you in bowling Green. BT
 

La Hot Rods

Well Seasoned Member
Supporting Member 15
So how many of you racers have used this style of collector?
I feel this style would give more torque and maybe a little more horse power.
My plan was to install some of these on are Wilson headers.
transitional merge collector.jpg
 

boxerdog

Well Known Member
Supporting Member 5
So how many of you racers have used this style of collector?
I feel this style would give more torque and maybe a little more horse power.
My plan was to install some of these on are Wilson headers.
View attachment 61017
I use something similar (Edelbrock merge collectors) on the Stahls on my '61, and I just go on out with 3" and run it through the mufflers. Being as it is sorta a street car and all, I run mufflers, DOT tires and full interior.

Collectors are here: https://www.summitracing.com/parts/edl-6583 (different model and I think Eddy quit making them)
 
Top