Can't find pic of anchor point to frame. Need to know which way tin retainer goes.
Iowa 409 Guy Well Seasoned Member Supporting Member 15 May 2, 2023 #1 Can't find pic of anchor point to frame. Need to know which way tin retainer goes.
La Hot Rods Well Seasoned Member Supporting Member 15 May 2, 2023 #2 I believe the bent over part goes to the top.
Iowa 409 Guy Well Seasoned Member Supporting Member 15 May 2, 2023 #3 Right, but from the outside or inside? Was thinking inside.....
La Hot Rods Well Seasoned Member Supporting Member 15 May 2, 2023 #4 Outside. The felt washers on the inside.
Jim Sullivan Well Known Member Supporting Member 10 May 2, 2023 #6 Looking at the picture, I believe you were correct the first time James. The tabbed "washer" looks to be on the outside, under the nut.
Looking at the picture, I believe you were correct the first time James. The tabbed "washer" looks to be on the outside, under the nut.
La Hot Rods Well Seasoned Member Supporting Member 15 May 2, 2023 #7 I was referring to the bent over tang, it goes to the bottom.