Tooth

I have rollers under stock valve covers no drippers. If you need more room glue 2 gaskets together.

The only difference in stock covers that I know is the 58 only ones and you only gain on the front and rear ends as they are more...

Of the steel valve covers, are there any which would give more clearance for roller rockers/poly locks than others? I am aware of the...

Off to a decent start on door panels besides the shitty lines. I’m gonna use carpet on the lower section and separate the vinyl and...

Maybe something like this.

Thanks, I’ve found the limits of my wife’s sewing machine so I’m hunting a sturdier one.

Been slowly picking away at the door panels. I had intentions of using screwing the panel at each location the plastic retainers are in...

On second or third thought I may see if I can use those plastic trim push pins that are used on newer cars.

230 grains weight from a FMJ of a 45 acp in the left or right ear of the suspect would probably rip most of his head off and make the...

I was lucky enough to meet and talk with Ed Iskenderian several years ago at Eagle Field. He is an amazing guy with a lot of knowledge...

The perp should be charged with attempted murder punching a 102 year old in the face/head. Instead, I bet that he is back out on the...

Let me who did it, I'm 69 and that thug will get an azz beating. I hate phuking azzholes that pick on old people. Glad Ed's ok.

With a lead pipe! :bat

Just goes to show how bad society is when 102 year old guys are getting punched in the face! Judge will probably let them off with a...

Well my eyes are opened up a little more now. I guess there is a big difference between a street regulator and a race car regulator. And...