frt/ rear 61 valances
- Thread starter blown 409
- Start date
impalaragpat
Well Known Member
VFN link
About time...Ive asked sherman and goodmark for these ,too.
http://www.vfnfiberglass.com/site.htm
About time...Ive asked sherman and goodmark for these ,too.
http://www.vfnfiberglass.com/site.htm
star
Member
LOL, I figured once we molded these someone else would do it, we made molds from some front and rear NOS valances over a month ago and I have sold some on ebay, http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&viewitem=&item=300166187668
these valances are not perfect but they actually do fit pretty well,the problem with making them out of fiberglass is that you have to make them thicker than steel valances , they will stick out aprox. 1/16 farther than an original steel valance, the protrusion is not as noticable on the front as on the rear valance where it meets the quarter panel,they are 2 ply thick and are very sturdy once mounted, If anyone is interested we are selling them for $100 each plus actual shipping to ur location,we are only making them when ordered so turnaround time should not be more than 2 weeks
these valances are not perfect but they actually do fit pretty well,the problem with making them out of fiberglass is that you have to make them thicker than steel valances , they will stick out aprox. 1/16 farther than an original steel valance, the protrusion is not as noticable on the front as on the rear valance where it meets the quarter panel,they are 2 ply thick and are very sturdy once mounted, If anyone is interested we are selling them for $100 each plus actual shipping to ur location,we are only making them when ordered so turnaround time should not be more than 2 weeks