Recent content by b a king

I first would see if i could have fished it out with one of the cable thingies with the claws that come out and clamp. But to late now.

check your inbox

Spray silicone on bearing/o-ring

GOT THE CORE OUT TODAY. I took some stuff loose that i prolly didnt have to but its out. It has harrison core number 3142034. .From what i have read this is original core. Would you recommend have shop find right length core and put the ends on? This is not a job i look forward to tackling...

Yes sir it is leaking. I'm going to see if local radiator shop can repair it. I see you have a 57 you have owned for 50 years. I have a 56 2dht ive owned since 1973. My brother has a57 210 he bought 65. I'll be 64 next week aint as easy to climb around on these things as id used to be!! Many...

The mecum pics look like mine. This means i got to pull the under hood box out also ,correct?

I guess i may need the supplement.I'm an analog man have no idea how to post pics.

Its a 59 elCamino with factory air, 348. I have the inside box removed but the core still will not move. What am i missing. I have assembly manual, i still haven't found anything relevant to it. Am i missing some bolts/screws. I appreciate any help.

surprised the control arms aren't boxed.I have seen where the guys build those cars with hydraulics cut the whole bottom of frame out. Then they put 1/4 plate on top of the tunnel. stiff as a board. an old super stock racer told me to fill center carrier bearing with silicone let harden.I have...

Did you say you swapped tires?? If not could they be out of round? Do you have a tach in it? do you have a extra trans yoke? see what the rpm is at vibration speed.Pull shaft stick in yoke, see if you get anything then

Check bushing at end of trans tail-shaft, grab yoke shake up and down. not while running

Might not be the right place,BUT any of you guys got a good 3.08 chunk you would sell, bring it to Bowling Green?

Hello.Lets go back to wheel spacer.Is it just one of those universal type spacers? with elongated holes? if it is you have to find a way to hold spacer some what centered.I use a small piece of masking tape doubled over.If its not that how about Harmonic balancer?

didn't know you were a member.i hope to have both there.

I never noticed...lol