Gliderider06

I've got these, full set. I bought a ring set for them $350.

On the rear lower control arms, there are 2 holes in the frame. Does one of the holes raise the car more than the other? Thanks

New Holley 50cc accelerator pump kit. Package was messed up but all the parts are there. Asking $50.00 shipped to a US postal address

I'd call Show cars as well. You will probably have a set within a week. I haven't seen any on Ebay so that is probably the best way to...

If you want right at 10-1 on a budget [sorta],go with the Icon for the 4 inch stroke crank,the stock stroke crank, and a 6.385 inch...

No stock rods after all the $$$ spent in rebuild for me.

Eagle, Scat or the Molnar rods are all good quality and reasonable in price. by the time you get new bolts and rehone stock rods you...

I got a call yesterday from CP. Turns out the pistons I have are a cast piston with their logo-ish in them. So with that said, we...

I got a complete kit from Schafer classic exhaust. Give them a call and they may just bend the tail pipes for you. When I ordered my...

Oh, I will have to look. I have a bunch of Mopar bolts. Thanks!

I think they may be a couple of threads shorter that a BBC? Not sure now, I know that some Chrysler ones work also.

A stock-ish 409 rebuild, would you use ARP bolts or stud kit? I'm missing a main bolt and need new, so... Depending upon what CP Carillo...

I used a black iron tee and short nipple on my Edelbrock intake.

I also used a tee at the heater hose fitting.

I've got a few pics of my journey, 1. turning down center bushings, 2. checking clearances, 3. tooling ready, 4. sizing backing plates...