4" stroker help

[567trishop]

I have a blown 348 with a eagle 4" stroke. It has 600hp at the rear wheels and is a manual. My oil pump pick up broke of causing damage to the crank and rods only. Can i put a Callies Dragonslayer Series Forged 4340 Crankshaft for Big Block Chevy 4.000" Stroke, 2.200" Pin, 2.750" Mains in the 348 by only grinding down the mains ? And if what else do i have to do, thanks Anthony

 

[Phil Reed]

Turn down the mains, turn down the crank snout, cut new groove for the balancer keyway, and you'll probably have to clearance the block for the counter weights. Others can chime in but I think this is correct.

 

[Clyde Waldo]

Look at ShowCars part #6529.

 

[impalamike.com]

Man, lets see photos of that blown 348.