63 standard bore 409 TK Block

[pepemotorsports]

I just picked up a 62 QD block that the machine shop Said it only need honed for standard pistons. The cyl are In perfect shape
It was going to be rebuilt over thirty years ago but the bare block was just sitting on the shelf! I Also got a steel crank with it And small port heads
The crank has the number 0819
What would be a good rod And piston for this, for just a nice street cruiser
Thanks
Pepemotorsportsv

 

[Phil Reed]

That is a truck block which has a notch at the top of each cylinder. 7.5 to 1 comp. ratio. Should make good horsepower with right piston and rods. Your low horse heads not the best....depends what build you desire.

 

[Don Jacks]

What are the casting numbers on the heads? Congrats on the block and crank!