I’ve read through a few post on here about the Borgeson box and I’m considering returning it to Summit and starting over with the Global West bump steer eliminator kit. I cannot believe they’ve made this Borgeson kit for so long and have not ironed out the issues with it. The bolts through the box into the frame bracket were too long and hit my frame rail leaving a gap. I added one washer to each bolt and not the bracket sits flush against the frame but the angle on the steering u joint will be at 35-45 degrees at least. Just wondering if anyone thinks I’m being overly critical or if the smart thing to do is pony up for that Global West kit.