I have a 409 +.070, 3.76 crank 690 cylinder heads Ross pistons from Show Cars.
2 camshafts
One is an isky grind 264 hydraulic .300 lift at the cam(says .450 at the valve with1.7 rocker,got to love that)
Two is a Crane- H-263/325-2-10
At the cam intake .325 at the valve with 1.75 rockers .569
exhaust .336. .588
Those are my two options
What do you think?
2 camshafts
One is an isky grind 264 hydraulic .300 lift at the cam(says .450 at the valve with1.7 rocker,got to love that)
Two is a Crane- H-263/325-2-10
At the cam intake .325 at the valve with 1.75 rockers .569
exhaust .336. .588
Those are my two options
What do you think?