Going off roading or drag racing?And done.
More serious question is when rebuilding one of these are you restricted to a certain style of Booster for any reason? I know there are half a dozen styles out there or more. There must be gains to be made if you use one style over another. I don't know how custom you can get in this application when Holley is pretty much unlimited due to aftermarket following.And done.
So is my wagon but you made it work. LOL!I think the front carb is missing some parts and screws!
Thanks Petey!Very nice Dan........!!!!!
Details!I think the front carb is missing some parts and screws!
I believe edelbrock does make a carb with an annular booster. Don’t know if it would adapt or not. I did see some turn the afb booster into an annular one but it didn’t look simple.More serious question is when rebuilding one of these are you restricted to a certain style of Booster for any reason? I know there are half a dozen styles out there or more. There must be gains to be made if you use one style over another. I don't know how custom you can get in this application when Holley is pretty much unlimited due to aftermarket following.
Me too. Hoping it smooths out the jumpy o2 readings and cures the lean out as the car goes down track.Can't wait for the results
https://performanceimprovements.com/products/ed1903. Might have to get some parts and check for swapability.I believe edelbrock does make a carb with an annular booster. Don’t know if it would adapt or not. I did see some turn the afb booster into an annular one but it didn’t look simple.