CP Carillo pistons

[Skip FIx]

Eagle, Scat or the Molnar rods are all good quality and reasonable in price. by the time you get new bolts and rehone stock rods you have almost as much in them!

 

[Iowa 409 Guy]

No stock rods after all the $$$ spent in rebuild for me.

 

[Don Jacks]

If you want right at 10-1 on a budget [sorta],go with the Icon for the 4 inch stroke crank,the stock stroke crank, and a 6.385 inch Scat rod.The only other Icons are for 9.9 compression in a car block .A truck block will lower you by .7 typically.

 

[Ishiftem]

What Don said.

 

[409Kid]

That’s interesting. I called Carillo several weeks ago and they said they didn’t have a spec sheet for Z-11 pistons. I know Arias did. I guess I’ll call them again since I plan on getting my H beam rods from them as well.

 

[Ishiftem]

They will only have the valve location. They will not have blueprints to make a reproduction of a factory piston. Nobody will. Talk to Richard Penneton. Aka Ric.

 

[409Kid]

I’ll call them again. I was told they had no specs to work from. I want 12.5:1 CR 4” stroke using 6.135 rods and Mopar bore and ring specs and valve reliefs to accept .700 lift

 

[Ishiftem]

You’ll need to know what cam. Max lift is not a determining factor. Duration and overlap is.