Ok, thought it best to start a seperate thread for this one.
Since it looks like I will be putting the aluminum heads on the first 454, I have one problem. I was told the valves are longer than stock so will need non stock length push rods.
Question is, how do I tell what ones I need?
Here's the valves these heads have:
Exhaust valves:
Manley 11905-8XH-426 Stainless, 1.940 in. Diameter, .3100 in. Stem, 4.915 in. Length
Intake valves:
Manley 11856-8 Stainless Steel, 2.250 in. Diameter, .341 in. Stem, 5.494 in. Length
Since it looks like I will be putting the aluminum heads on the first 454, I have one problem. I was told the valves are longer than stock so will need non stock length push rods.
Question is, how do I tell what ones I need?
Here's the valves these heads have:
Exhaust valves:
Manley 11905-8XH-426 Stainless, 1.940 in. Diameter, .3100 in. Stem, 4.915 in. Length
Intake valves:
Manley 11856-8 Stainless Steel, 2.250 in. Diameter, .341 in. Stem, 5.494 in. Length