Red 409 63 impala
Well Known Member
I installed a front disc/ rear drum conversion on my 63 impala. Along with the install I put in the booster mount on the firewall that raises it up. I adjusted the lever on the mount so it approx.1/4 inch away from the firewall, when the pedal is up. Pushing down on the pedal lets the lever max travel.Adjusted the pin on the front of the booster so their is free play. Adjusted the pin on the end of the booster so there is a very slight gap. Had to adjust the pin all the way in. I have bled the brakes six times..the rears are so so, the fronts are barely stopping. When the brakes are bled fluid comes out, no air The fluid level goes down in the master. The pedal is hard, never hits the floor. It is like the fluid is moving but with no force?