Does anybody have a picture of rochester carb #7020024

Texas Doc

Member
the application is for a 1963 impala 409 engine 340 hp automatic transmission. I have pictures of a carb I just purchased that I can email ...i tried uploading it to this post but I got file to large error message
 

62impala409

 
Supporting Member 1
The '63 supplement to the '61 GM shop manual has pictures of the carb. These carbs are pretty specific because of the angled fuel inlet.
 

Texas Doc

Member
Thank you so much, AWESOME post, you made my night, is the part # of the carb on the carb itself or only on the tag ?
once again thank you
 

Dewman

Well Known Member
Supporting Member 1
I didn't see the part number anywhere on the carb................ I could have missed it, maybe someone will chime in on where a part number would be on the carb.
 

62impala409

 
Supporting Member 1
Alan Colvin notes that the Rochester 2G and 4G carb series (the "C" is for choke) were identified by the triangular stamped tag under an air horn screw. The Quadrajet carbs had a circular ID tag recessed in a cavity in the side of the fuel bowl. Leo
 
Top