Front end Alignment for Drag racing?

[Fathead Racing]

I've always been impressed by the way that car launches. It's a fully equipped street car with DOT legal tires and it's a lot heavier than a race only car, so it's impressive to see it launch so well.

And I still don't know what I'm doing Jim, I couldn't get the car to hook the day this picture was shot. I think my 60' times were at 1.65 that day down from 1.58. I had 15 gals of fuel in the tank and probably 60 lbs in the trunk.

 

[Don Jacks]

On a "slick'track like you were dealing with,have you tried leaving at a higher rpm? Sometimes,that'll soften the "hit" from your convertor allowing a better 60ft.

 

[oldskydog]

AND Tasco Turquoise is the absolute best color for 60.

 

[BSL409]

I took the spacers out last night and will have the front end done Thursday I had the 62 front end done to stock specs years ago and that cars goes straight as can be, So we will set up like Aubrey& Jim said
Thanks,
Insane-1

 

[1961BelAir427]

Way late to help you Brian, but I saw this article tonight and thought I'd share the link with everyone.

http://www.onallcylinders.com/2015/01/15/steering-straight-inside-story-wheel-alignments/

Hope it helps someone.

 

[BSL409]

Way late to help you Brian, but I saw this article tonight and thought I'd share the link with everyone.

http://www.onallcylinders.com/2015/01/15/steering-straight-inside-story-wheel-alignments/

Hope it helps someone.

Nice
Thanks,