Help ID wheels.

B

bigblocks4ever

New Member
Hello,
I need help to ID a set of 4x6 JK wheels. They have a large C by the valve stem.
When I purchaesd them, I was told they are for 409 cars? Did I taken?
Thanks in advance for your help.
 
oldskydog

oldskydog

Well Known Member
Supporting Member 10
Should be a Chevrolet Warren (C) manufactured 62 or 63 wheel from a station wagon (standard) or pass car, not specific to 409, but could have been ordered as an option.
64 had the same size wheel for the same applications, but would have been made by Kelsey Hayes (KH) or Norris Technologies (NT).

There should be an assembly date stamped near the valve stem hole.
 
real61ss

real61ss

Well Known Member
Supporting Member 8
oldskydog said:
Should be a Chevrolet Warren (C) manufactured 62 or 63 wheel from a station wagon (standard) or pass car, not specific to 409, but could have been ordered as an option.
64 had the same size wheel for the same applications, but would have been made by Kelsey Hayes (KH) or Norris Technologies (NT).

There should be an assembly date stamped near the valve stem hole.
Click to expand...

They could have been ordered as an option in '63 or '64. I don't think they were available on anything but the 9 passenger station wagon prior to that.
 
You must log in or register to reply here.
Top