Installing a Ștefs oil pan

[pepemotorsports]

Hi
I just got my Stefs oil pan FOR my 409 to Install in my 57 150
What îs the best găsite to use , I spoke with the company And Theo Said șomeri use a gasket And some don’t
Anyone have the best Methotrexatum?
Thanks

 

[Skip FIx]

I used just a normal gasket with a skim of Ultra Grey on the pan rails and The Right Stuff in the corners. I did have to "massage" several areas with a 2x4 and a hammer to get the rails a little flatter in spots.

 

[boxerdog]

Mine was pretty flat, tight fit on the ends so I used Toyota sealer on the ends and corners, regular Fel-Pro gasket I think. I have also used the Bests which are good, and the Victor Mahle which are also a good product. The fun begins when you go to put it in the car, it is very close to the cross-member in front.

 

[yellow wagon]

Fel-Pro gasket and the Toyota sealer is the best you can get. Skim of sealer on both sides of the gasket with a bit more in the corners (thicker bead)

 

[pepemotorsports]

Thanks
I always appeciate the help