Is this part of a distributor tach drive?
DonSSDD Well Known Member Supporting Member 2 Sep 4, 2021 #1 Attachments 127A8F57-694D-440E-B7D7-DB0F0BB6081D.jpeg 92 KB · Views: 10
409newby Well Known Member Supporting Member 11 Sep 4, 2021 #3 GM made tach drives off the distributor and the rear of generator's
D Don Jacks Well Seasoned Member Supporting Member 3 Sep 4, 2021 #4 I would say yes Don.That was a common failure,usually caused by lack of luburication for the cable to the tach.
I would say yes Don.That was a common failure,usually caused by lack of luburication for the cable to the tach.
La Hot Rods Well Seasoned Member Supporting Member 15 Sep 4, 2021 #5 How big is the cable hole, didn't the fuel injection units use a drive off the distributor also?
DonSSDD Well Known Member Supporting Member 2 Sep 4, 2021 #6 I think this is off a split window coupe, I’ve never been near a FI unit. Hole measures 0.295 inches.
I think this is off a split window coupe, I’ve never been near a FI unit. Hole measures 0.295 inches.
409gang Well Known Member Supporting Member 1 Sep 4, 2021 #7 It looks like a tach drive unit out of a Corvette distributor that was used for years.
