So Cecil, the 4657731 clips are for the bottom? As I stated, Hubbards has the top and sides. They were sent to my body man. Phil Reed said that the trim for the 61 Impala and the trim for the 62 bubbletop are different. Different clip? Cecil, how would I find that clip based on that part number? Thanks, Jeff
Jeff,
What Phil said in his post was that the 62 Impala is different than the 61-62 bubble. I just checked my 61 Parts Catalogue and it shows the 731 clip on the 61 sport coupe as well a the 792 clip. I don't have a 62 parts book to verify what happened to the 792 clip, but usually in the back of the parts catalogue is a list of part numbers that were discontinued or replaced by another part number. If someone has that list, it may show a replacement clip part number. The 731 clip was used on many chevy back glass reveal mouldings from 55 to at least 62 and probably later. It was used on 61 (and 62)sport coupe and 61 sport sedan on the upper and lower and also on the side on the sport sedan. ... Also on 55-57 chevy upper .The group number is 11.309 in the parts catalogue.
As far as I can tell, the mouldings and clips should be the same for 61 Impala and both the 61 and 62 Bel Air sport coupes. The 731 clips should be fairly easy to find used, if not repro, but I don't have a pic of one to tell what they look like. The 792 clip must have been either discontinued or replaced after about 67.
Buick, Olds, Pontiac, and maybe Cadillac should have used the same clips in 61.