I have hydraulic pump on the brain lately so I decided to go for it! Just bought this little beauty!
Features & Details:
So you might ask, what do you want that for Bob???
Well, I'm glad you asked!
Just as we all have air operated tools and sources of air in our shops and garages, I'm going a step further! I will have a source for hydraulic power.
My plan is that this unit will power a few items. 1) a Hossfeld (tribute) metal bender that I've been working on for a few years!) 2, my shop press that I will now upgrade to hydraulic, a hydraulic bench vice I plan on building, a hydraulic exhaust pipe expander / bender I'm thinking of making, possibly a metal guillotine cutter and whatever else I dream up later on. It's for the man who has everything.
Doubt I would ever have to but this could also be used to operate my 4 post lift IF the current unit should die. (I hardly use it so don't expect to have to) But, it would put an end to the need for 220v it needs now.
Much more to come on this venture...
Features & Details:
- [EFFICIENT MOTOR]- Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.9L/min - 5L/min.
- [LARGE CAPACITY TANK]- With a large fuel tank capacity, 8L, the hydraulic power pack is efficient. A visible window for monitoring the inside. The pump uses 16th hydraulic oil. It has the advantages of compact size, lightweight, simple structure, and ease of use.
- [ACCURATE PRESSURE GAUGE]- This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the hydraulic pump is working at any time. From 2Mpa to 70Mpa, you can try slowly and choose the right working pressure you need.
- [EFFECTIVE OIL VOLUME]- Manage this double-acting hydraulic gear pump by a lever which has a rubber cap in one end for a comfortable grasp and use. Control two equipment at the same time, pretty efficient. The oil pipe coupling is fitted with a PT3/8” thread.
- [VARIOUS APPLICATION]- The manual hydraulic pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency.
So you might ask, what do you want that for Bob???
Well, I'm glad you asked!
Just as we all have air operated tools and sources of air in our shops and garages, I'm going a step further! I will have a source for hydraulic power.
My plan is that this unit will power a few items. 1) a Hossfeld (tribute) metal bender that I've been working on for a few years!) 2, my shop press that I will now upgrade to hydraulic, a hydraulic bench vice I plan on building, a hydraulic exhaust pipe expander / bender I'm thinking of making, possibly a metal guillotine cutter and whatever else I dream up later on. It's for the man who has everything.
Doubt I would ever have to but this could also be used to operate my 4 post lift IF the current unit should die. (I hardly use it so don't expect to have to) But, it would put an end to the need for 220v it needs now.
Much more to come on this venture...