Pic's & problem

CVECCH409

Active Member
Hi guy's haven't been on the site for awhile, actually I got burned out (with my car). Now I'm finally finished (if we're ever finished). I've run into a problem! Everything seems to be running great then it just shuts off as if its running out of gas. So I thought maybe the fuel line was too close to the header and it was vapor locking. I rapped the header insulated the fuel line drove about a mile and it shut off again this time it would not start. I believe I found the problem I just need help figuring out how to fix it. I have an IGNITIONMAN HEI and the module is burned so I replaced it and it fired right up. My ? is why would the module burn out after only driving it 3 times.:dunno :bang :scratch
 

Attachments

  • newer imp.jpg
    newer imp.jpg
    95.8 KB · Views: 82
  • my09.jpg
    my09.jpg
    95.2 KB · Views: 102

rwagon57

 
Supporting Member 1
The car is awesome:clap :clap :clap

It could simply be that it was a defective module, it happens. I wouldn't be overly concerned unless the new module fails in an equally short time frame.
 
Top