Trunk Moulding Width

[Impalaguru]

This might be a dumb question but I was hoping that someone could give me the overall width (length?) of a 1963 upper trunk moulding for a 2dr or 4dr (non-stationwagon piece). This is the one with the CHEVROLET letters on it. Any help would be great!
Ross

 

[pvs409]

63 moulding width

I measured one I have off a 63 and it is 54 5/8" along the center line of the moulding.
This measurement does not include the bend in the moulding its measuring across the moulding at the left top and right top end to end.

The ends of the moulding are at an angle, with the top measurement about 1/8 " difference in the overall width from the bottom of the moulding.

Paul Stensland
Sgt. Bluff, Iowa